O C T O P U S WATERMAKER
MARINE DESALINATORS
FRESH WATER ON BOARD EVERYWHERE
EXPLORE OUR RELIABLE WATERMAKERS DESIGNED FOR YOUR NEEDS
30 liters per hour - if there is a low water requirements and space is limited
2x30 liters per hour - if the space is limited and the water requirement is higher
60 liters per hour - if there is a moderate water requirement and more space is available
160 liters per hour - if there is a high water requirement and plenty of space
OUR WATERMAKERS WILL PROVIDE YOU WITH DRINKING WATER OF THE HIGHEST QUALITY
Octopus watermakers are used both stationary and mobile
At your yacht , at home or on the road in a motorhome
ALL OCTOPUS WATERMAKERS ARE REDUNDANT
Our redundant watermakers are unique on the market
( more information on the REDUNDANCY page )
YOU HAVE THE OPTION TO START WITH
the
OCTOPUS K-version ( High-pressure-cleaner version )
or the
OCTOPUS P-version ( Plunger pump version )
You will receive all necessary adapters for any conversion from one version to the other
! The advantage is obvious !
You start with the K-version and can later upgrade to the P-version if you want
( With the K-version , you can upgrade your watermaker later with any pump you want to install . The connection is already in place )
Or you can start with the P-version and can upgrade to the K-version if you have a Kärcher on board as a backup in case your high-pressure pump fails
CONTACT US FOR MORE INFORMATIONS
60LH WATERMAKER
WITH CONTROL PANEL
PICTURE SHOWS THE WATERMAKER OPSM-60LH-CPD
available - powered by a pressure washer ( K-OPSM-60LH ) and
available - powered by a high pressure plunger pump ( P5-OPSM-60LH )
Both versions are available with CPD ( Control panel direktly mounted at the membrane housing ) and
CPA ( Control panel not direktly mounted at the membrane housing ; we offer this version with longer hoses in : +2m / +4m / +6m at no extra charge )
L=117cm / W=24cm / H=17cm
160LH WATERMAKER
WITH CONTROL PANEL
PICTURE SHOWS THE WATERMAKER P13-OPDM-160LH-CPD
available - powered by a high pressure plunger pump ( P13-OPDM-160LH )
This version is avialable with CPD ( Control panel direktly mounted at the membrane housing ) and
CPA ( Control panel not direktly mounted at the membrane housing ; we offer this version with longer hoses in : +2m / +4m / +6m at no extra charge )
L=125cm / W=30cm / H=17cm
60LH WATERMAKER
WITHOUT CONTROL PANEL
PICTURE SHOWS THE WATERMAKER OPSM-60LH-WOCP available - powered by a pressure washer ( K-OPSM-60LH ) and available - powered by a high pressure plunger pump ( P5-OPSM-60LH )
L=115cm / W=20cm / H=17cm
2x30LH WATERMAKER
WITHOUT CONTROL PANEL
PICTURE SHOWS THE WATERMAKER OPDM-60LH-WOCP
available - powered by a pressure washer ( K-OPDM-60LH-WOCP ) and
available - powered by a high pressure plunger pump ( P5-OPDM-60LH-WOCP )
L=73cm / W=20cm / H=17cm
160LH WATERMAKER
WITHOUT CONTROL PANEL
PICTURE SHOWS THE WATERMAKER P13-OPDM-160LH-WOCP available-powered by a high pressure plunger pump ( P13-OPDM-160LH-WOCP )
L=125cm / W=20cm / H=17cm
30LH WATERMAKER
WITHOUT CONTROL PANEL
PICTURE SHOWS THE WATERMAKER K-OPSM-30LH-WOCP
available - powered by a pressure washer ( K-OPSM-30LH-WOCP )
L=68cm / W=20cm / H=17cm
THE
MEMBRANE HOUSING
Membrane tube and end caps made out of high strenght aluminium. All fasteners made out of 316 stainless steel .
NEVER CRACKS , NEVER RUSTS
Are you wondering whether you have sufficient space to install the membrane housing?
Here is some information regarding installation:
You can install the membrane housing either horizontally or vertically.
With the DM variant—that is, the version featuring two membrane housings—you can install them in parallel, in series, at various angles relative to one another, or even in different locations, provided you have a longer hydraulic line.
( See how an osmosis membrane works )
THE
CONTROL PANEL WITH REMOTE CONTROL KEY
Equipped with a REMOTE CONTROL KEY , VALVE TO TEST THE WATER , HIGH PRESSURE VALVE , TDS-MONITOR , FLOW-CONTROL , STAINLESS STEEL PRESSURE GAUGE with GLYCERIN and a ROCKER SWITCH to switch the boost pump on and off
The remote control key allows you to switch the high-pressure pump on and off from anywhere on board
! All watermakers - CPD / CPA / WOCP are equipped with a remote control key , a valve to test the water and a tds-monitor !
The control panel is made out of a 2mm alumimium sheet 245mm x 245mm and is powder coatet
If you are ordering the version ( CPA ) you want to install the control panel from one convenient location :
We offer this version with longer hoses in : +2m / +4m / +6m at no extra charge
THE
FILTER UNIT 10 INCH FOR 60LH AND 160LH
The 5 inch pre-filter includes a boost pump 12V / 24V with a 50 microns filter. The 10 inch main-filter (1. filter stage are 20 microns and 2.filter stage are 5 microns) The 5 inch carbon-filter are 5 microns.
The filter unit comes with 12m of 10/8mm hose.
With the rinse timer it is possible to clean the device with fresh water.
L=64cm / W=15cm / H=47cm
THE
FILTER UNIT 5 INCH FOR 30LH and 2x30LH
The 5 inch pre-filter includes a boost pump 12V / 24V with a 50 microns filter. The 5 inch main-filter ( 1. filter stage are 20 microns and 2.filter stage are 5 microns ) The 5 inch carbon-filter are 5 microns.
The filter unit comes with 12m of 10/8mm hose.
With the rinse timer it is possible to clean the device with fresh water.
L=64cm / W=15cm / H=34cm
THE
PUMPS
PICTURE SHOWS THE P5 / P13 HIGH PRESSURE PLUNGER PUMP
COMES WITH A 3 METER HYDRAULIC HOSE
OUR WATERMAKERS ARE POWERED BY TWO TYPES OF PUMPS THE CHOICE IS YOURS
1. A KÄRCKER K2 ( NOT INCLUDED )
THIS IS THE EASIEST AND CHEAPEST WAY TO POWER A WATERMAKER
WHY DID WE CHOOSE A PRESSURE WASHER AS A PUMP ?
A K2 IS SMALL, VERY AFFORDABLE, AND READILY AVAILABLE WORLDWIDE
SINCE THE K2 IS SMALL AND VERY AFFORDABLE, IT MAKES SENSE TO HAVE ONE AS A BACKUP
THIS WAY, YOU'RE ON THE SAFE SIDE WHEN IT COMES TO PUMPS ON BLUEWATER TRIPS
P.S.: YOU CAN USE ALL KÄRCHER WITH A QUICK CONNECT ADAPTER
THE CEAPEST IS THE K2
BUT MANY CUSTOMERS SWEAR BY THE WATER-COOLED K4 WCM
2. A HIGH PRESSURE PLUNGER PUMP ( INCLUDED )
THIS IS THE CHOICE IF YOU HAVE LOTS OF SPACE
THE 60LH WATERMAKER IS POWERED BY THE P5 PUMP AND THE 160LH WATERMAKER IS POWERED BY THE P13 PUMP
P 5 WATERMAKER ( 60LH ) : This version is designed to operate with the P5 high pressure plunger pump.
! Matching E-Motor is not included ! We recommend :
www.js-technik.de ( Produkt-No.: 2D29081507F001 ) ML 90s-4 , 1,1 KW , 4-pol , B34
CLOCKWISE
P 13 WATERMAKER ( 160 LH ) : This version is designed to operate with the P13 high pressure plunger pump
! Matching E-Motor is not included ! We recommend :
www.js-technik.de ( Produkt-No.: 2D29101510F001 ) ML100L1 – 4 , 2,2 KW , 4-pol , B34
CLOCKWISE
If you buy the elektromotor , do not forget to buy the connecting wire 3x1,5mm2 with a plug
Why are the E-Motors not included ?
1. Perhaps you have a E-Motor you would like to continue using !
2. You can choose the E-Motor you think is right , 230V , 110V , 24V or 12V !
JOSEF
JOSEF REPORTS ON THE INSTALLATION OF HIS WATERMAKER
JOSEF
JOSEF REPORTS ON THE PRESERVING / PICKLING PROCESS OF HIS WATERMAKER
JOSEF`S INSTALLATION PLAN
THANK YOU JOSEF
FAQ
1.Q : How much power does the Kärcher K2/K4 use ?
1.A : The power consumption is 1150-1400 ( K2 ) and 1550-1800 ( K4 ) watts per hour
2.Q : How is the amperage ?
2.A : The amperage is 5A-6A ( 230V ) with the K2 and 7A-8A ( 230V ) with the K4
Depending on how you set the pressure for the membrane. (55bar-80bar)
3.Q : Can I use another Kärcher ?
3.A : Yes, as long as the Kärcher has the Quick Connect connection
4.Q : How long does the membrane last ?
4.A : That depends on how many hours a day water is produced and how carefully the pre-filters are maintained. So it's difficult to answer !
5.Q : Where can I buy replacement filters and replacement membranes?
5.A : Search the internet for 10 inch filter 10 micron polyester pleated filter and 10 inch activated carbon 5 micron filter and SW30-2540 membrane. You will find them everywhere !
6.Q : Is reverse osmosis water healthy because all important minerals like calcium and magnesium have been removed from it?
6.A : With a good diet, the body doesn't actually need additional minerals via drinking water, as these are absorbed through food. If you plan to drink only reverse osmosis water for an extended period and not consume any other minerals through your diet, we recommend installing an in-line mineralization cartridge before the fresh water tank. This will also significantly improve the taste of the reverse osmosis water. Change this every 6 months with daily use.You can buy this at Amazon.......
7.Q : Can I also buy the P-version without the high-pressure pump ?
7.A : Simply order the K version, then you have the option of connecting a Kärcher or your own high-pressure pump.
SHIPPING COSTS
( WATERMAKER )
Shipping outside Europe :
Shipping is 210 Euro
Shipping inside Europe ( no European Union ) :
Shipping is 80 Euro
Shipping within the European Union :
Shipping is 60 Euro
Shipping inside of Germany :
Shipping is 40 Euro
Content from Google Maps can't be displayed due to your current cookie settings. To show this content, please click "Consent & Show" to confirm that necessary data will be transferred to Google Maps to enable this service. Further information can be found in our Privacy Policy. Changed your mind? You can revoke your consent at any time via your cookie settings.